Saxanka Sare ee ER Milling Chuck Set
Qalabka wax lagu shubo ee ER-da waa meel saxan-sare oo saxan ah, kolaytyadu waa kuwo guga lagu raray, si ay u xajin karaan cabbirro kala duwan.Qalabkan chuck-ka ah ayaa ku habboon in lagu isticmaalo warshad-shiidyada iyo mashiinnada kale ee saxda ah.
| Dalabka No. | Cabirka godka | PCS/SET | |
| inji | mm | ||
| ER16-8in (mm) | 3/32 1/8 3/16 7/32 1/4 5/16 11/32 3/8 | 2 3 4 5 6 7 8 10 | 8 |
| ER25-6in (mm) | 1/8 3/16 5/16 3/8 1/2 5/8 | 4 6 8 10 12 16 | 6 |
| ER25-10in (mm) | 3/32 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 | 3 4 5 6 8 10 12 14 15 16 | 10 |
| ER32-6in (mm) | 1/4 5/16 3/8 1/2 5/8 3/4 | 6 8 10 12 16 20 | 6 |
| ER32-12in (mm) | 3/32 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 | 3 4 5 6 8 10 12 14 15 16 18 20 | 12 |
| ER40-8in (mm) | 1/8 1/4 3/8 1/2 5/8 3/4 7/8 1 | 3 5 8 12 15 18 22 26 | 8 |
| ER140-15in(mm) | 1/8 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 11/16 3/4 13/16 7/8 15/16 1 | 3 4 5 6 8 10 12 14 15 16 18 20 22 24 26 | 15 |
Dulqaadkii Bar Bar
| Taper ee chuck collet | Xadhkaha barbaradka | |
| R8 | 7/16 | 20UNF | |
| 7:24 30 | M12×1.75 | 1/2 | 13 UNC |
| 7:24 40 | M16×2.0 | 5/8 | 11 UNC |
| 7:24 50 | M24×3.0 | 1 - 8 UNC |
| MS2 | M10×1.5 | 3/8 - 16 UNC |
| MS3 | M12×1.75 | 1/2 | 13 UNC |
| MS4 | M16×2.0 | 5/8 | 11 UNC |
| MS5 | M20×2.5 | 3/4 | 10 UNC |
| MS6 | M24×3.0 | 1 ₦ -8UNC |
Fadlan ogaysii dunta isku dhafka ah ee bar-bar-ku-jiidka iyo qeexida xargaha (metric ama inch)
Fadlan ogeysii dhererka shank toosan iyo dia.
Waxaan ku faraxsanahay inaan ku siinno kollollo iyo chucks leh shank iyo tirooyin kala duwan iyadoo loo eegayo baahidaada.
